###############################################################################
#                    STEMMER IMAGING GmbH
###############################################################################
#
# File    : PV_ADIMEC_MX12P_8x23_50Hz_VSCAN_NonInterlaced.txt
# Author  : Manfred Wuetschner
# Date    : August.24.1998
# Modul   : PCVision Rev. B or later
# Camera  : ADIMEC MX12P 8x23 VSCAN NonInterlaced.
#
#           The camera has to be configured via RS232 control to
#           noninterlaced
#           50 Hz
#           TTL output
#
# Revision: 
#
###############################################################################

###############################################################################
#
# Modified by Greg Kreider, 11 Jan 00, for use with the itifg frame grabber
# module for Linux.  Tested with itifg-0.6.0 on a SuSE 6.0 (2.0.36) system.
#
# This file compiles to the following cam_cnf_str structure in the itifg
# driver.  You can store these values in an array of unsigned char's (80 
# bytes total) and pass a pointer to the array to ioctl 0x405047f5 to
# configure the frame grabber.
#  x00:  x01 x00 x00 x00 x00 x00 x00 x00   x00 x00 x00 x40 x00 x00 x00 x00
#  x10:  xc6 x01 x43 x00 x20 x00 x84 x01   x19 x04 x05 x00 x06 x02 x0b x00
#  x20:  x00 x01 xfe x04 x01 x00 xfe x03   x81 x00 x01 x00 xf6 x00 xc3 x00
#  x30:  x00 x30 x00 x00 x00 x00 x00 x00   x00 x00 x00 x00 x00 x00 x00 x00
#  x40:  xb8 x03 x01 x00 x05 x00 x02 x00   x04 x00 x00 x00 x11 x00 x00 x00
#
###############################################################################


[PCVision:0]
[AM-V:0]
	Slot_Number = 0
	Startup_Port = 0
[CameraPort:0]
	Camera_Name = "MX12P_50_VSCAN_NI"
	Camera_Structure = CreateStructure
	CCIR
	HTotal = 454
	HSync_Low = 67
	HEqual_End = 32
	Serration_Total = 388
	VTotal = 1049
	VSync_Low = 5
	HSync_Pol_Lo
	VSync_Pol_Lo
	VGate_Start = 518
	VGate_End = 11
	HOffset = 256
	HActive = 1278
	VOffset = 1
	VActive = 1024
	Strobe_Delay = 1
	LEN_Polarity_Hi
	FEN_Polarity_Lo
	FRST_Offset_Delay = 1
	FRST_Disable
	FRST_Active_Hi
	FRST_FROFF_Period
	FRST_Vsync_Disable
	PTG_HSYNC_Select
	CHSYNCEN_Disable
	VSYNCEN_Disable
	PLL_Mode
	LPF_Enable
	VSCAN_Enable
	Scale_1.5
	VClk_Inverted
	NonInterlaced
	FLDSHFT_Disable
	Trig_Disable
	Ext_Trigger
	Trigger_Active_Lo
	Strobe_Fast
	Strobe_Enable
	Strobe_Active_Hi
	Skip_Field_Disable
	Clamp_Delay = 0
	Clamp_Src_Sync_Strip
	Clamp_On_LEN_Fall
	PRef = 140
	NRef = 0
	PLL_FDIV = 952
	PLL_RDIV = 1
	PLL_VCO = 5
	PLL_PDA = 2
	PLL_LCOUNT = 4