#
# Example Configuration File for AM-VS Module
# Camera: CHOU CAM 4912 (xtal mode)
#
# Matthias Stein 01/01
#


[PCVision:0]		# Board 0

[AM-V:0]		# Module AM-PV No. 0

[CameraPort:0]		# Camera 0

      Name = "CHOU CAM 4912 XTAL fps:30 (8bit) RS512x480X0"

      HTotal = 622
      HSync_Low = 46
      HEqual_End = 23
      Serration_Total = 265
      VTotal = 522
      VSync_Low = 6
      HSync_Pol_Lo
      VSync_Pol_Lo
      VGate_Start = 519
      VGate_End = 12
      HOffset = 110
      HActive = 620
      VOffset = 20
      VActive = 260
      Strobe_Delay = 1
      LEN_Polarity_Lo
      FEN_Polarity_Lo
      FRST_Offset_Delay = 1
      FRST_Disable
      FRST_Active_Hi
      FRST_FROFF_Period
      FRST_Vsync_Disable
      PTG_HSYNC_Select
      CHSYNCEN_Enable
      VSYNCEN_Enable
      XTAL_Mode
      LPF_Enable
      VSCAN_Disable
      Scale_1.5
      VClk_Normal
      Interlaced
      FLDSHFT_Enable
      Trig_Disable
      Ext_Trigger
      Trigger_Active_Lo
      Strobe_Fast
      Strobe_Enable
      Strobe_Active_Hi
      Skip_Field_Disable
      Clamp_Delay = 14
      Clamp_Src_Sync_Strip
      Clamp_On_LEN_Rise
      PRef = 140
      NRef = 0
      PLL_FDIV = 623
#     PLL_LO = 0
#     PLL_HI = 0
      PLL_RDIV = 910
#     PLL_REFPOL_Hi
      PLL_VCO = 5
#     PLL_PFD = 3
#     PLL_PDEN_Hi
#     PLL_INTFLT_Lo
#     PLL_INTVCO_Hi
#     PLL_CLKSEL_Hi
#     PLL_Internal_Feedback
#     PLL_FBKPOL_Hi
#     PLL_ADD_Lo
#     PLL_SWLW_Lo
       PLL_PDA = 2
#     PLL_PDB = 3
#     PLL_LDLG_Hi
#     PLL_FINEEN_Lo
       PLL_LCOUNT = 7
#     PLL_OMUX1_Lo
#     PLL_Ext_Ref_Mode