Re: setup problems for PCVision + JAI CV-M1

["M.Stein" <matthias@gom.com>]

Hi Richard!

Is the camera running with an older device driver (0.6.0)? If it is so,
please load the old debug module itifg_g.o, start the test program and
have a look at /var/log/messages. This file should contain (beside other
noisy output) a dump of the PCVision register space (please search for
hsyncpw, hequipw, hserrpw ... AFTER the SET_CAMCNF call). Compare these
output with the 0.7.0 ones (here you have to set DEBUG_ITIFG=7 in the
Makefile + recompile to get the output).

If you find differences, please inform me - if not or the camera also
isn't running with the old module, send me the complete output.

						matthias

-------------------------------------------------------------------------------
GOM mbH                                                 Tel.: ++49 531/3804-330
Gesellschaft fuer optische Messtechnik                  Fax.: ++49 531/3804-333
Rebenring 33                                            Mail: M.Stein@gom.com
38106 Braunschweig GERMANY                              http://www.gom.com
-------------------------------------------------------------------------------