[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ITI configuration file for Adimec MX12P/8123 camera



Dear Sirs,

Attached is a configuration file for an Adimec MX12P 8123 camera.
It is based on a Windows ITI configuration file delivered by
Adimec with the camera.  As the note says, we have it working on a
SuSE 6.0 system with a PCVision frame grabber.

Corrections/comments can be filtered back to me or Adimec.  We have
essentially no experience with the PCVision other than getting this
working, though, so explicit corrections are probably better than
recommendations for improvements ...

We use the name "mx12p_8123.cam" for this file.  If you want, you
can add it to the distribution (we have Adimec's permission to
release this; see the address line for their e-mail).

Thanks,

Greg Kreider
PMVS




###############################################################################
#                    STEMMER IMAGING GmbH
###############################################################################
#
# File    : PV_ADIMEC_MX12P_8x23_50Hz_VSCAN_NonInterlaced.txt
# Author  : Manfred Wuetschner
# Date    : August.24.1998
# Modul   : PCVision Rev. B or later
# Camera  : ADIMEC MX12P 8x23 VSCAN NonInterlaced.
#
#           The camera has to be configured via RS232 control to
#           noninterlaced
#           50 Hz
#           TTL output
#
# Revision: 
#
###############################################################################

###############################################################################
#
# Modified by Greg Kreider, 11 Jan 00, for use with the itifg frame grabber
# module for Linux.  Tested with itifg-0.6.0 on a SuSE 6.0 (2.0.36) system.
#
# This file compiles to the following cam_cnf_str structure in the itifg
# driver.  You can store these values in an array of unsigned char's (80 
# bytes total) and pass a pointer to the array to ioctl 0x405047f5 to
# configure the frame grabber.
#  x00:  x01 x00 x00 x00 x00 x00 x00 x00   x00 x00 x00 x40 x00 x00 x00 x00
#  x10:  xc6 x01 x43 x00 x20 x00 x84 x01   x19 x04 x05 x00 x06 x02 x0b x00
#  x20:  x00 x01 xfe x04 x01 x00 xfe x03   x81 x00 x01 x00 xf6 x00 xc3 x00
#  x30:  x00 x30 x00 x00 x00 x00 x00 x00   x00 x00 x00 x00 x00 x00 x00 x00
#  x40:  xb8 x03 x01 x00 x05 x00 x02 x00   x04 x00 x00 x00 x11 x00 x00 x00
#
###############################################################################


[PCVision:0]
[AM-V:0]
	Slot_Number = 0
	Startup_Port = 0
[CameraPort:0]
	Camera_Name = "MX12P_50_VSCAN_NI"
	Camera_Structure = CreateStructure
	CCIR
	HTotal = 454
	HSync_Low = 67
	HEqual_End = 32
	Serration_Total = 388
	VTotal = 1049
	VSync_Low = 5
	HSync_Pol_Lo
	VSync_Pol_Lo
	VGate_Start = 518
	VGate_End = 11
	HOffset = 256
	HActive = 1278
	VOffset = 1
	VActive = 1024
	Strobe_Delay = 1
	LEN_Polarity_Hi
	FEN_Polarity_Lo
	FRST_Offset_Delay = 1
	FRST_Disable
	FRST_Active_Hi
	FRST_FROFF_Period
	FRST_Vsync_Disable
	PTG_HSYNC_Select
	CHSYNCEN_Disable
	VSYNCEN_Disable
	PLL_Mode
	LPF_Enable
	VSCAN_Enable
	Scale_1.5
	VClk_Inverted
	NonInterlaced
	FLDSHFT_Disable
	Trig_Disable
	Ext_Trigger
	Trigger_Active_Lo
	Strobe_Fast
	Strobe_Enable
	Strobe_Active_Hi
	Skip_Field_Disable
	Clamp_Delay = 0
	Clamp_Src_Sync_Strip
	Clamp_On_LEN_Fall
	PRef = 140
	NRef = 0
	PLL_FDIV = 952
	PLL_RDIV = 1
	PLL_VCO = 5
	PLL_PDA = 2
	PLL_LCOUNT = 4
[CameraPort:1]
	Camera_Name = "MX12P_50_VSCAN_NI"
	Camera_Structure = CreateStructure
	CCIR
	HTotal = 454
	HSync_Low = 67
	HEqual_End = 32
	Serration_Total = 388
	VTotal = 1049
	VSync_Low = 5
	HSync_Pol_Lo
	VSync_Pol_Lo
	VGate_Start = 518
	VGate_End = 11
	HOffset = 256
	HActive = 1278
	VOffset = 1
	VActive = 1024
	Strobe_Delay = 1
	LEN_Polarity_Hi
	FEN_Polarity_Lo
	FRST_Offset_Delay = 1
	FRST_Disable
	FRST_Active_Hi
	FRST_FROFF_Period
	FRST_Vsync_Disable
	PTG_HSYNC_Select
	CHSYNCEN_Disable
	VSYNCEN_Disable
	PLL_Mode
	LPF_Enable
	VSCAN_Enable
	Scale_1.5
	VClk_Inverted
	NonInterlaced
	FLDSHFT_Disable
	Trig_Disable
	Ext_Trigger
	Trigger_Active_Lo
	Strobe_Fast
	Strobe_Enable
	Strobe_Active_Hi
	Skip_Field_Disable
	Clamp_Delay = 0
	Clamp_Src_Sync_Strip
	Clamp_On_LEN_Fall
	PRef = 140
	NRef = 0
	PLL_FDIV = 952
	PLL_RDIV = 1
	PLL_VCO = 5
	PLL_PDA = 2
	PLL_LCOUNT = 4
[CameraPort:2]
	Camera_Name = "MX12P_50_VSCAN_NI"
	Camera_Structure = CreateStructure
	CCIR
	HTotal = 454
	HSync_Low = 67
	HEqual_End = 32
	Serration_Total = 388
	VTotal = 1049
	VSync_Low = 5
	HSync_Pol_Lo
	VSync_Pol_Lo
	VGate_Start = 518
	VGate_End = 11
	HOffset = 256
	HActive = 1278
	VOffset = 1
	VActive = 1024
	Strobe_Delay = 1
	LEN_Polarity_Hi
	FEN_Polarity_Lo
	FRST_Offset_Delay = 1
	FRST_Disable
	FRST_Active_Hi
	FRST_FROFF_Period
	FRST_Vsync_Disable
	PTG_HSYNC_Select
	CHSYNCEN_Disable
	VSYNCEN_Disable
	PLL_Mode
	LPF_Enable
	VSCAN_Enable
	Scale_1.5
	VClk_Inverted
	NonInterlaced
	FLDSHFT_Disable
	Trig_Disable
	Ext_Trigger
	Trigger_Active_Lo
	Strobe_Fast
	Strobe_Enable
	Strobe_Active_Hi
	Skip_Field_Disable
	Clamp_Delay = 0
	Clamp_Src_Sync_Strip
	Clamp_On_LEN_Fall
	PRef = 140
	NRef = 0
	PLL_FDIV = 952
	PLL_RDIV = 1
	PLL_VCO = 5
	PLL_PDA = 2
	PLL_LCOUNT = 4
[CameraPort:3]
	Camera_Name = "MX12P_50_VSCAN_NI"
	Camera_Structure = CreateStructure
	CCIR
	HTotal = 454
	HSync_Low = 67
	HEqual_End = 32
	Serration_Total = 388
	VTotal = 1049
	VSync_Low = 5
	HSync_Pol_Lo
	VSync_Pol_Lo
	VGate_Start = 518
	VGate_End = 11
	HOffset = 256
	HActive = 1278
	VOffset = 1
	VActive = 1024
	Strobe_Delay = 1
	LEN_Polarity_Hi
	FEN_Polarity_Lo
	FRST_Offset_Delay = 1
	FRST_Disable
	FRST_Active_Hi
	FRST_FROFF_Period
	FRST_Vsync_Disable
	PTG_HSYNC_Select
	CHSYNCEN_Disable
	VSYNCEN_Disable
	PLL_Mode
	LPF_Enable
	VSCAN_Enable
	Scale_1.5
	VClk_Inverted
	NonInterlaced
	FLDSHFT_Disable
	Trig_Disable
	Ext_Trigger
	Trigger_Active_Lo
	Strobe_Fast
	Strobe_Enable
	Strobe_Active_Hi
	Skip_Field_Disable
	Clamp_Delay = 0
	Clamp_Src_Sync_Strip
	Clamp_On_LEN_Fall
	PRef = 140
	NRef = 0
	PLL_FDIV = 952
	PLL_RDIV = 1
	PLL_VCO = 5
	PLL_PDA = 2
	PLL_LCOUNT = 4