PCDig and JAI CV-L103 colour camera

[Will Lockhart <will@mvhi.com>]

Hi Matthias,

More PCDig questions I'm afraid. I'm trying to get the PCDig to work
with a 24 bit colour camera. I'm getting data back from the camera,
but it doesn't look right (although it clearly is image data of some
sort). I should add that I'm using a program I wrote to display the
image data, since the test_itifg program can only display gray scale
data.

What I need to know is:

Which FPGA file should I use (I guess p3b1tn00.exo)?
What values should I provide in the camera configuration fields for
the GIOC_GE_SET_CAMCNF ioctl? (The NT configuration file is at the
bottom of this e-mail - if you could convert this to ITIFG format then 
I could use read_config to work out what values are needed)

Is there anything else I should know about using colour cameras with
the PCDig/ITIFG?

Thanks,

Will

###################################################

# IFC Generated Configuration File

# Filename: jai_cv_l103.txt

# Date: 04/20/00

###################################################



 

#########################################

# IFC Generated Section Start

#########################################

 

[PCD:0]

 

# Camera Definition

 

Name = "SI_JAI_LC-103_B0P0"

Camera_Structure = Create_Structure

PIXEL_SIZE = 24

TRIGGER_SRC = DIFFERENTIAL_TRIG,DIFFERENTIAL_TRIG

TRIGGER_POLARITY = RISING_EDGE,RISING_EDGE

TRIGGER_STATE = LEVEL_LOW,LEVEL_HIGH

GEN_SW_TRIGGER = 1950352947,1950352947

LEN_SYNC = SYNC

LEN_POLARITY = RISING_EDGE

FEN_ENABLE = DISABLE

FEN_POLARITY = RISING_EDGE

HORZ_OFF = 0

WIDTH_PIXELS = 2048

VERT_OFF = 0

HEIGHT_PIXELS = 2048

FIRST_FIELD_STAT = EVEN_FIELD

FIRST_FIELD_CMD = EVEN_FIELD

SCAN_MODE_STAT = NILACED

PARAM_GROUPS_APPLICABLE = 126

MULTI_ENABLE = DISABLE

MULTI_POLARITY = ACTIVE_LOW

MULTI_INPUT_MODE = MULTI_INPUT_FIELD

PCLK_POLARITY = RISING_EDGE

MULTI_OUTPUT_ENABLE = DISABLE

USE_EXT_MULTI = DISABLE

RETIME_ENABLE = DISABLE

RETIME_POLARITY = RISING_EDGE

CAM3_ENABLE = DISABLE

EXSYNC_ENABLE = ENABLE

EXSYNC_POLARITY = ACTIVE_HIGH

EXSYNC_MODE = EXSYNC_FREE_RUNNING

PRI_ENABLE = DISABLE

PRI_POLARITY = ACTIVE_LOW

CAM_MODE_CTL = 0

EXT_SYNC_TIME = 143.010000

EXT_SYNC_PERIOD_TIME = 1200.010000

CCLK_FREQ_SEL = 4.000000

IMAGE_GEOMETRY = 1CHAN_L2R

NUM_CAMERAS = 1

TRIG_GLITCH_DETECTOR = DISABLE,DISABLE

CCLK_STATIC_ENABLE = DISABLE

CCLK_STATIC_STATE = LEVEL_LOW

EXO_FILENAME = ""

TRIG_DIVIDE_FACTOR = 256

TRIG_DIVIDE_CONTROL = DISABLE_TRIG_DIVIDE

USER_DEF_GEO_NAME = ""

EXSYNC_START_LOCATION = EXSYNC_START_CYCLE_END

EXSYNC_MIDPOINT_DELAY = 1000.020020

PRI_START_LOCATION = PRI_START_CYCLE_END

PRI_MIDPOINT_DELAY = 0.140000

PRI_END_LOCATION = PRI_END_AT_LEN_BEGIN

 

#########################################

# IFC Generated Section End

#########################################