[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Chou cam 4912
Hi all,
I've tried the Chou camera 4912 with the pcvision frame grabber and
your device driver under linux: it works greatly.
Now I am trying to run the camera in xtal mode giving to the camera
both H and V reference from the pcvision output...and I am in trouble.
I generated a config file with the itex camera configuration program
under windows 98, but I am not able to convert the numbers to use the
file with your driver.
I attach the ITEX config file in the mail.
Any tip to convert it?
Thanks a lot
Enzo Pascale
-----------------------------------------------------------------------
[SYSTEM:0]
[PCVision:0]
Latency = 248
IRQ_Line = 0
Mailbox1 = 0x0
Mailbox2 = 0x0
Mailbox3 = 0x0
Mailbox4 = 0x0
Frame_Count = 1
Start_Field = Next_even_field
YCRCB_Mono_Disable
[AM-V:0]
Slot_Number = 0
Startup_Port = 0
[CameraPort:0]
Name = "RS512x480X0"
Camera_Structure = Create_Structure
RS170
HTotal = 310
HSync_Low = 45
HEqual_End = 22
Serration_Total = 264
VTotal = 521
VSync_Low = 5
HSync_Pol_Lo
VSync_Pol_Lo
VGate_Start = 518
VGate_End = 11
HOffset = 109
HActive = 619
VOffset = 19
VActive = 259
Strobe_Delay = 0
LEN_Polarity_Lo
FEN_Polarity_Lo
FRST_Offset_Delay = 0
FRST_Disable
FRST_Active_Hi
FRST_FROFF_Period
FRST_Vsync_Disable
PTG_HSYNC_Select
CHSYNCEN_Enable
VSYNCEN_Enable
XTAL_Mode
LPF_Enable
VSCAN_Disable
Scale_1.5
VClk_Normal
Interlaced
FLDSHFT_Enable
Trig_Disable
Ext_Trigger
Trigger_Active_Lo
Strobe_Fast
Strobe_Enable
Strobe_Active_Hi
Skip_Field_Disable
Clamp_Delay = 14
Clamp_Src_Sync_Strip
Clamp_On_LEN_Rise
PRef = 140
NRef = 0
PLL_FDIV = 622
PLL_LO = 0
PLL_HI = 0
PLL_RDIV = 909
PLL_REFPOL_Hi
PLL_VCO = 5
PLL_PFD = 3
PLL_PDEN_Hi
PLL_INTFLT_Lo
PLL_INTVCO_Hi
PLL_CLKSEL_Hi
PLL_Internal_Feedback
PLL_FBKPOL_Hi
PLL_ADD_Lo
PLL_SWLW_Lo
PLL_PDA = 2
PLL_PDB = 3
PLL_LDLG_Hi
PLL_FINEEN_Lo
PLL_LCOUNT = 7
PLL_OMUX1_Lo
PLL_Ext_Ref_Mode
-----------------------------------------------------------------------------