Re: Chou cam 4912

["M.Stein" <matthias@gom.com>]

Hello Enzo!

I have attached the converted file. I you want to know, how to calculate
the values from the windows files, please see e.g. jai-cv_m1-vs-pcv.cam.
There are some comments, like 'use value + 1'. There is a difference
between the windows files and our, because we write the values DIRECLY
into the registers, to keep the code easy. The commented out values are
not adjustable without making the board unuseable.

						matthias
-------------------------------------------------------------------------------
GOM mbH                                                 Tel.: ++49 531/3804-330
Gesellschaft fuer optische Messtechnik                  Fax.: ++49 531/3804-333
Rebenring 33                                            Mail: M.Stein@gom.com
38106 Braunschweig GERMANY                              http://www.gom.com
-------------------------------------------------------------------------------

#
# Example Configuration File for AM-VS Module
# Camera: CHOU CAM 4912 (xtal mode)
#
# Matthias Stein 01/01
#


[PCVision:0]		# Board 0

[AM-V:0]		# Module AM-PV No. 0

[CameraPort:0]		# Camera 0

      Name = "CHOU CAM 4912 XTAL fps:30 (8bit) RS512x480X0"

      HTotal = 622
      HSync_Low = 46
      HEqual_End = 23
      Serration_Total = 265
      VTotal = 522
      VSync_Low = 6
      HSync_Pol_Lo
      VSync_Pol_Lo
      VGate_Start = 519
      VGate_End = 12
      HOffset = 110
      HActive = 620
      VOffset = 20
      VActive = 260
      Strobe_Delay = 1
      LEN_Polarity_Lo
      FEN_Polarity_Lo
      FRST_Offset_Delay = 1
      FRST_Disable
      FRST_Active_Hi
      FRST_FROFF_Period
      FRST_Vsync_Disable
      PTG_HSYNC_Select
      CHSYNCEN_Enable
      VSYNCEN_Enable
      XTAL_Mode
      LPF_Enable
      VSCAN_Disable
      Scale_1.5
      VClk_Normal
      Interlaced
      FLDSHFT_Enable
      Trig_Disable
      Ext_Trigger
      Trigger_Active_Lo
      Strobe_Fast
      Strobe_Enable
      Strobe_Active_Hi
      Skip_Field_Disable
      Clamp_Delay = 14
      Clamp_Src_Sync_Strip
      Clamp_On_LEN_Rise
      PRef = 140
      NRef = 0
      PLL_FDIV = 623
#     PLL_LO = 0
#     PLL_HI = 0
      PLL_RDIV = 910
#     PLL_REFPOL_Hi
      PLL_VCO = 5
#     PLL_PFD = 3
#     PLL_PDEN_Hi
#     PLL_INTFLT_Lo
#     PLL_INTVCO_Hi
#     PLL_CLKSEL_Hi
#     PLL_Internal_Feedback
#     PLL_FBKPOL_Hi
#     PLL_ADD_Lo
#     PLL_SWLW_Lo
       PLL_PDA = 2
#     PLL_PDB = 3
#     PLL_LDLG_Hi
#     PLL_FINEEN_Lo
       PLL_LCOUNT = 7
#     PLL_OMUX1_Lo
#     PLL_Ext_Ref_Mode